User Manual NRP1004 Series IP Phone
5-48 www.newrocktech.com
Table 5-24 Auto provision parameters setting
Field name
Explanation
Auto Update Setting
Current Config
Version
Specifies the version of the current configuration file. If the version of the CFG
configuration file downloaded is the same as same as that of the running one, the
system does not enable
auto provision
. If the terminal confirms the configuration in
Digest mode, the terminal wouldn’t upgrade configuration unless the configuration on
the server is different from the running configuration.
Common Config
Version
Specifies the version of the common configuration file. If the configuration
downloaded and the running configurations are the same, the auto provision would
stop. If the terminal confirms the configuration in Digest mode, the terminal wouldn’t
upgrade configuration unless the configuration in the server is different from the
running configuration.
CPE Serial
Number
Specifies the CPE serial number.
User
Specifies the username of an FTP server If the download protocol is TFTP, this
parameter does not need to be configured. If the download protocol is FTP, and no
value is set to this parameter, the system uses the default value
anonymous
.
Password
Specifies the password for logging in to the FTP server.
Config Encrypt
Key
Inputs a password if the configuration file to be upgraded is encrypted.
Common Config
Encrypt Key
Inputs a password if the common configuration file to be upgraded is encrypted.
Save
Autoprovision
Information
Saves the username, password, authentication and ID information configured for
HTTP/HTTPS/FTP. Information saved on the phone remains unchanged unless the
URL information configured on the server changes.
DHCP Option Setting
DHCP Option
Setting
Specifies the DHCP option. The value can be DHCP custom option, DHCP option 66,
or DHCP option 43. Select any of the preceding modes so that the application
parameters can be obtained automatically. By default, the DHCP option is disabled.
Custom DHCP
Option
The value ranges from 128 to 254. The custom DHCP option must be identical with
the one defined in the DHCP server.
Plug and Play
Enable PnP
Enables the PnP function. If PnP is enabled, the terminal will send a SIP SUBSCRIBE
message to a multicast address when it starts up. Any SIP server supporting SIP
SUBSCRIBE messages will reply with a SIP NOTIFY message containing the Auto
Provisioning Server URL. The URL can be used to obtain the configuration files to be
downloaded to the terminal.
PnP Server
Specifies a PnP server.
PnP Port
Specifies a PnP port.
PnP Transport
Specifies a PnP transfer protocol.
PnP Interval
Specifies the PnP timeout period, in hours.
Phone Flash Settings
Server Address
Sets FTP/TFTP/HTTP server IP address for auto update. The address can be an IP
address or Domain name with subdirectory.
Config File Name
Sets the name of the configuration file which needs to be updated. The system will use
the MAC address as the config file name if the config file name is null. For example,
000102030405.
Protocol Type
Specifies the protocol type, which can be FTP, TFTP, HTTP or HTTPS.
Update Interval
Specifies the update interval, in hours.
Содержание NRP1004 Series
