New Rock Technologies NRP1000 Скачать руководство пользователя страница 51

Страница: 51 / 86

NRP1000 Series IP Phone User Manual

New Rock Technologies, Inc. 5-27

indicates that if the phone is configured with a SIP2 server and has been registered to the server, all

users attempting to make phone calls through the SIP2 server need to add 8 before the phone number

indicates that if the phone is configured with a an IAX2 server and has been registered to the server,

all users attempting to make phone calls through the IAX2 server need to add 2 before the phone

number

Note: To compatible with functions in version 1.6, the "

Dialpeer With Line:

" field is added to the

configuration file of version 1.7 version, indicating whether to enable the on-line inquiry function. 0 for

Disabled

and 1 for

Enabled

. The default value is 0.

Compared with version 1.6, functions added in version 1.7 include:

Not enabled on-line inquiry

The function is the same as that in version 1.6.

Type

: specifies the protocol on which the rule takes effect.

Destination

: specifies the destination IP address.

0.0.0.1

: indicates that SIP line 1 is used.

0.0.0.2

: indicates that SIP line 2 is used.

0.0.0.x

: indicates that SIP line x is used.

(To compatible with codes in earlier versions,

0.0.0.0

indicates that SIP line 1 is used;

255.255.255.255

indicates that SIP line 2 is used.

Configuration examples are as follows:

If the phone dials the number 21111, the call is sent out through SIP line2, with the called number of

1111.

If the phone dials the number 32222, the call is sent out through IAX2, with the called number of 2222.

Enable on-line query capabilities

The precondition for this function is that the phone must have multiple lines, allowing the line and

protocol to be selected before dial-up.

Dialpeer table in the query, the first comparison dialing protocol is selected in the table and dialpeer

agreement, if the same, continue down the match, otherwise, check the next one.

Step match line information, comparing the selected dial-up line is a line in the table and dialpeer is the

same, if the same, continue down the match, otherwise the next query.

The third step is for a prefix or exact match.



Mode

: If the mode is set to SIP, this rule takes effect only for SIP-based calls. If the mode is set to

IAX2, this rule takes effect only forIAX2 calls.



Destination

: indicates the destination IP address.



0.0.0.1

: indicates that this rule takes effect only for calls on SIP line 1.

Содержание NRP1000























































































Результаты поиска

Содержание NRP1000

Отзывы:

Похожие инструкции для NRP1000

Бренды по названию

Популярные бренды

New Rock Technologies NRP1000, Руководство пользователя

Результаты поиска

Содержание NRP1000

Отзывы:

Похожие инструкции для NRP1000

Бренды по названию

Популярные бренды