New Rock Technologies NRP1000, Руководство пользователя

Страница: 21 / 86

NRP1000 Series IP Phone User Manual
New Rock Technologies, Inc. 3-5
3.3 Other Functions
3.3.1 Auto Handdown

Press Menu > Features > Enter > Auto Handdown > Enter .

Enable the auto handdown function using the navigation keys and . Set the time to play
the alert tone (in seconds) and press Save .

When the call ends, the phone will back to the standby interface after the hand down time expires.
3.3.2 Dial Plan

Press Menu > Features > Enter > Dial Plan > Enter .

Available plan include: Pressing # to send, Timeout to send, Timeout, Fixed Length Number,
Press # to Do BXFER, BXFER On Onhook, AXFER On Onhook. You can enable or disable each
dial plan using the navigation keys and .
3.3.3 Dial Peer

Press Menu > Features > Enter > Dial Peer > Enter .

Press Add and input the number and destination in the page displayed. For example: the number is
1 and the destination is 1234. Then, press Save .

Input 1# in the dial interface, you call the number 1234 in speed dial mode.
3.3.4 Auto Redial

Press Menu > Features > Enter > Auto Redial > Enter .

Enable the auto redial function using the navigation keys and . If you choose Enabled ,
set values for Interval and Times , and then press Save .

After auto redial is enabled, if the callee does not answer your call for the moment, you are
prompted whether use the auto redial function. If you press OK , the phone will call out the callee
according the Interval and Times you set.
3.3.5 Call Complete

Press Menu > Features > Enter > Call Complete > Enter .

Enable this function using the navigation keys and .

If the callee does not answer your call for the moment, the phone prompts you “ Call Complete
Waiting number ?” Press OK . When in the callee becomes idle, the phone prompts you “Call
Complete Waiting number ?” (in 30s). If you press OK , the phone will call out the number
automatically.