New Rock Technologies NRP1000, Руководство пользователя

Страница: 14 / 86

User Manual NRP1000 Series IP Phone
2-2 www.newrocktech.com
For detailed settings, see 2.2.1 Network Settings.
2.1.2 Connecting to the Power Outlet
Prior to the configuration, make sure that the power connector matches the power outlet, and both the
voltage and electric current are comply with the requirement.

Plug the direct current (DC) connector of the power adapter into the DC 5V port in the rear of the
NRP1000/P.

Plug the alternating current (AC) connector of the power adaptor into the power outlet and start
the NRP1000/P up.

You can view the system progress and the INITIALIZING prompt on the screen. After the
startup, you can view the current date, system time, and device model on the screen of the
NRP1000/P.

You can configure your account and make phone calls after the NRP1000/P is registered to a
server.
2.2 Basic Initialization
NRP1000/P provides a plenty of functions and parameters for configuration. To make a proper
configuration, you need to know basic information about the network and Session Initiation Protocol
(SIP) to understand the meanings of each parameter. To help you enjoy the high-quality VoIP services
with low costs, this chapter describes items must be configured, making the configuration easy and
intuitive.
2.2.1 Network Settings
Prior to the configuration, make sure that the Internet broadband connection is normal and the hardware
is properly connected. The factory network mode of the NRP1000/P is DHCP, allowing the
NRP1000/P to access the network as long as there is a DHCP server. If there is no DHCP server
available, you need to change the network mode of the NRP1000/P to Static IP or PPPoE according to
the network type.
PPPOE mode (for dial-up ADSL)
Step1 Obtain the PPPoE account and password.
Step2 Press Menu > Settings > Advanced Settings and enter the password. Choose Network > WAN
settings > Connection Mode . Then, choose PPPoE through navigation keys and press Save .
Step3 Press Back to return to the parent menu, choose PPPoE Setting , and press Enter .