New Rock Technologies HX4E Series Скачать руководство пользователя страница 77

Страница: 77 / 125

MX Series Voice Gateway User Manual

New Rock Technologies, Inc.

Name

Description

Timer E

non-INVITE request retransmit interval, UDP only. It is 500 ms by default.

Timer F

non-INVITE transaction timeout timer. It is 17000 ms by default and ranges from 2000 to 32000
ms.

Timer G

INVITE response retransmit interval. It is 2000 ms by default.

Timer H

Wait time for ACK receipt. It is 16000 ms by default.

Timer I

Wait time for ACK retransmits. It is 5000 ms by default.

Timer J

Wait time for non-INVITE request retransmission. It is 16000 ms by default.

Timer K

Wait time for response retransmission. It is 5000 ms by default.

URI RFC 3966

Calling party

number

Select the address scheme for calling party:



SIP: SIP URI is used, for example

“From: <sip:[email protected]>;tag=143349062153-1”.



TEL: tel URL is used, such as “From: <tel:212>;tag=143349065857-1”.

Called party number

Select the address scheme for called party:



SIP: SIP URI is used, for example “To: <sip:[email protected]>”.



TEL: tel URI is used, for example “To: <tel:212>”.

user=phone

Parameter

Places the user=phone field in front of the SIP version in the INVITE request.

e.g. INVITE sip:[email protected];user=phone SIP/2.0

TCP

This parameter is only available on the OCS gateway (for example, the MX8A-OCS).

Protocol type

Select SIP/TCP or SIP/UDP, and the default is UDP. Note: both peers must choose the same
transmission type.

Local TCP port

Specify the local port used by SIP/TCP.

2.6.7 RADIUS (Unavailable on the HX4E/HX4G)

After login, click

Advance

d >

RADIUS

to open this interface.

Figure 2-33

RADIUS Configuration Interface

Содержание HX4E Series






























































































































Результаты поиска

Содержание HX4E Series

Отзывы:

Похожие инструкции для HX4E Series

Бренды по названию

Популярные бренды

New Rock Technologies HX4E Series, Руководство пользователя

Результаты поиска

Содержание HX4E Series

Отзывы:

Похожие инструкции для HX4E Series

Бренды по названию

Популярные бренды