New Rock Technologies HX4E Series, Руководство пользователя

Страница: 19 / 125

MX Series Voice Gateway User Manual
New Rock Technologies, Inc.
19
Table 1-9 Description of MX8A/MX8G Back Panel
Item Description
CON The console port is used for local management and testing. PCs can be connected to device by linking
the RS232 port to CON port.
Connecting cables need to be produced or purchased.
If the connection is established between the device and the mobile PC with no RS232 ports, please use
the cable together with a USB to an RS232 converter cable.
Cables are shown below in Figure 1-5 and Figure 1-6.
PC/WAN The PC port is used to connect a computer.
The WAN port is used to connect the uplink network.
Both are 10/100 Mbps Ethernet ports (RJ45). They share one IP address, which, by default, is obtained
through DHCP. If no IP address is obtained, 192.168.2.218 is used by default, and you can change it on
Basic > Network page.
FXO/FXS FXS port or FXO port
Figure 1-5
RJ45 to RS232 Serial Cable
Figure 1-6
USB to RS232 Converter
Cable
Table 1-10 Indicator Status of MX8A/MX8G
Indicator Status Description
PWR (green)
Blinking green The device is starting.
Steady green The device is running.
Off The device is powered off or a power supply fault occurred.
STU
(red, green)
Steady red
The WAN interface failed to acquire the IP address. Possibly the WAN
interface is not connected to a network cable, the WAN interface
address fails to be acquired by DHCP, the IP addresses are conflicted,
and the PPPoE dialing fails.
Blinking red The device is starting or the KUPDATE is upgrading.
Steady green Registration is successful.
Blinking
alternatively
between red and
green
Registration failed.