New Leader Guardian L3030G4 MultApplier, Руководство оператора

Страница: 53 / 88

- 53 -
L3030G4 CNH
www.NewLeader.com
(800) 363-1771 307369-AA-G
Header
“raveling” of belt grip area and loosening hardware. Retighten loose nuts and peen end of lacing screw
into slot of nut as required.
ADJUSTMENT
WARNING
Moving part hazard. To prevent death or serious injury, turn off engine before adjusting.
Keep hands, feet, hair and clothing away from moving parts.
Tension
NOTE: Belt tension should be just tight enough to prevent slippage—no tighter.
1. Figure 1 - For a new conveyor belt, square idler turnkleen with conveyor bottom by loosening jam
nuts and adjusting take-up bolts (A). Measure to ensure Measurement “B” is equal on each side.
2. Figure 2 - With the conveyor shut off, measure vertical distance from bottom of sill to conveyor belt
in front of second cross tube from front. Measurement “A” is to be 3” (8cm) on each side.
3. Adjust idler screws (A) as necessary to obtain Measurement “A”.
A
B
A
Figure 1
FRONT
OF UNIT
A
Figure 2
B B
Figure 3
Lubrication & Maintenance