
- 47 -
L3030G4 CNH
www.NewLeader.com
(800) 363-1771
307369-AA-G
Header
6. Figure 5 - Center Material Divider by
measuring from the right hand inner drop-off
point to the inner hex
fl
at on the right hand
Spinner Hub Bolt. Repeat measurement on
opposite side. Measurements must be equal,
or no greater than 1/8” off overall.
Figure 5
7. Figure 6 - Measure on each side from Spinner
Frame back plate to forward drop-off point on
Material Divider. Both measurements must be
12-1/4” (31cm) or no greater than 1/8” (0.3cm)
off overall.
8. If adjustments are necessary, loosen the
3/8” capscrews on each side and adjust as
necessary. Once corrected, tighten hardware
to recommended torque.
12.25 "
12.25 "
Figure 6
9. Figure 7 - If equipped, Ensure the Hillside
Divider is mounted squarely and centered at
both the front and the rear. Hillside Divider
panel should be perpendicular to ground.
Ensure the rear of the panel is centered over
the center section of the Material Divider.
Figure 7
Initial Startup
Содержание Guardian L3030G4 MultApplier
