8
６
６
．
．
O
O
p
p
e
e
r
r
a
a
t
t
i
i
n
n
g
g
m
m
e
e
t
t
h
h
o
o
d
d
s
s
■
Please read the following precautions carefully before using.
1.
Be sure to check and confirm that the power supply and voltage is correct as outlined in specifications.
2. When carrying the product, disconnect from the wall and please be sure to hold the bottom of the machine securely
with two or more people (more than one person) and move.
3.
Since the perforator is very heavy (more than 30kg), be sure to place it on a solid surface.
4. Perforating capacity is based upon
PPC paper (
64 g /m
2
).
a. The perforating capacity of Die Block No.905 & No.905L is approximately 30 sheets.
b.
Depending upon voltage, paper weight, needle diameter & needle configuration, it is possible that the
maximum of 30 sheets per perforation will not be realized.
c. The capacity for Model No.605 and No.705 will be 5-30 sheets depending upon voltage, paper
weight, needle diameter & configuration.
5
.
Die Block Model No.905 (Pin Type)
To change the number or characters, please pull out the select pin and rotate the wheel freely with your
finger. When the engraved letter of each numeral, character or mark you wish to perforate is located,
insert the select pin into the number or character which is on the wheel. Please be sure that the select pin
is inserted into the wheel hole securely, otherwise it may cause the needles to bend and the wheel to
possibly sustain damage.
6
.
Die Block No.905L (Lever Type)
To change the number or character of the wheel, rotate the levers on the wheel up or down to the number
or character you wish to perforate. Please be sure to place the lever pin on the fixed position, otherwise it
may cause the it may cause the needles to bend and the wheel to possibly sustain damage. Once the lever
reaches the fixed position, you will feel it you will feel it lock into place.
7. Please don’t perforate any material except for paper.
Examples are as follows: metals (paper clips and staples), cloth products, leather products, seals, resins, etc.
8. Please empty the paper chip storage container on a regular basis as over-accumulation can cause problems
by compacting paper chips into the die block.
9. The machine is designed to start the perforation upon paper insertion. If the unit continues to activate on its’
own, please disconnect and contact your local servicing dealer for assistance.
10. If paper is jammed in the die block, please disconnect and contact your local servicing dealer for assistance.
11. Please don’t perforate in a previously perforated area. Change paper position for each new perforation.
12. Over time and based upon types of materials being perforated, some wear is to be expected. If the paper is
not being perforated thoroughly, please contact your local servicing dealer for assistance.
13.
If you will not be using the perforator for an extended period, please remove the power plug from the wall.
