10
■
Basic operation method of perforating (common to all series)
※
This product has no power switch. Turn the key switch for turning on the power.
(
Status of power lamp and key switch when operating the unit)
※
The key of the power key switch
①
can be plugged in or removed when it is in the left side position.
In the single use mode, the paper is inserted into the paper
feed opening
⑧
, when
the depth switch
⑫
is pressed, the motor is activated, the perforating operation is started. When the perforating
operation is completed, the motor stops.
※
Under continuous use mode, the motor will work continuously.
1. Turn the key switch
①
to right side. (key in the middle
：
single use) (key in the right side
：
continuous use)
※
Please refer to the above pictures.
Lamp
③
lights green, the machine can perforate.
2. When inserting the paper into the feed opening
⑧
, the edge of the paper will activate the depth micro switch and
the perforation process will begin.
3. Please pull out the paper after perforating.
4. The perforating is completed.
5. After every cycle, paper chips will accumulate in the paper chip storage container.
※
Please clean the paper chip storage container on a regular basis. Accumulated
paper waste can clog the die if the container is not emptied regular
ly.
Light is off
Key is on the left side.
It is possible to insert
or remove the key
Light is on
Key is in the middle.
The machine is on
single use mode.
Light is on
Key is on the right
side. The machine is
set on continuous mode.
Please discard the paper waste frequently,
otherwise it will cause damage
.
