New Holland 716523006, Руководство оператора, Страница: 9 / 20

9
m--3526
1
3
2
4
4
Front
Figure 15
1. Blade oriented front to
rear
2. Measure front blade tip
3. Rotate front tip to rear
and measure
4. Measure here (side to
side)
3. Measure the distance from the front tip of the blade
(Fig. 15) to the flat surface.
4.
Carefully rotate the blade tip until it is in the rear
position and measure it in that position.
When the blade tip is in the front position, it should be
1/8 in. (3 mm) lower than when it is in the rear position.
5. If an adjustment is required, turn the adjusting nut
(Fig. 16) on the back of the mower. To raise the front of
the mower, turn the adjustment nut clockwise. To lower
the front of the mower, turn the nut counterclockwise.
m--3514
1
Figure 16
1. Front to rear adjustment rod
Adjusting the Side-to-Side Blade Cut
This optional adjustment is available if necessary to
compensate for uneven side-to-side cut.
Equalize side-to-side cut by adjusting the two carriage bolts
(Fig. 17) on the mower. Check the height of the blade at
outside blade tips (Fig. 15).
m--3459
1
Figure 17
1. Side-to-side adjustment bolts