New Holland 716523006, Руководство оператора, Страница: 2 / 20

2
©
2004 by CNH America LLC
Racine, WI
All Rights Reserved
Printed in the USA
Contents
Page
Introduction 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety and Instruction Decals 3 . . . . . . . . . . . . . . . . . . .
Setup 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Loose Parts 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Routing the Mower Belt 4 . . . . . . . . . . . . . . . . . . . .
Installing the Mower 4 . . . . . . . . . . . . . . . . . . . . . .
Attaching the PTO Drive Belt 6 . . . . . . . . . . . . . . .
Adjusting the Mower 8 . . . . . . . . . . . . . . . . . . . . . .
Removing the Mower 10 . . . . . . . . . . . . . . . . . . . . . .
Operation 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating the Mower 12 . . . . . . . . . . . . . . . . . . . . . .
Check for Debris 12 . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Tips 12 . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maintenance 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recommended Maintenance Schedule 13 . . . . . . . . .
Servicing the Blades 13 . . . . . . . . . . . . . . . . . . . . . . .
Greasing the Blade Spindles 15 . . . . . . . . . . . . . . . . .
Checking PTO Drive Belt Tension 15 . . . . . . . . . . . .
Extending PTO Drive Belt Life 15 . . . . . . . . . . . . . .
Replacing the Blade Drive Belt 16 . . . . . . . . . . . . . .
Storage 16 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction
Read this manual carefully to learn how to operate and
maintain your product properly. The information in this
manual can help you and others avoid injury and product
damage. Although CNH designs and produces safe
products, you are responsible for operating the product
properly and safely.
Whenever you need service, genuine CNH parts, or
additional information, contact an Authorized Service
Dealer or CNH Customer Service and have the model and
serial numbers of your product ready. Figure 1 illustrates
the location of the model and serial numbers on the
product.
1
m--3515
Figure 1
1. Location of the model and serial numbers
Write the product model and serial numbers in the space
below:
Model No.
Serial No.
This manual identifies potential hazards and has special
safety messages that help you and others avoid personal
injury and even death.
Danger
,
Warning
, and
Caution
are
signal words used to identify the level of hazard. However,
regardless of the hazard, be extremely careful.
Danger
signals an extreme hazard that will cause serious
injury or death if you do not follow the recommended
precautions.
Warning
signals a hazard that may cause serious injury or
death if you do not follow the recommended precautions.
Caution signals a hazard that may cause minor or moderate
injury if you do not follow the recommended precautions.
This manual uses two other words to highlight information.
Important calls attention to special mechanical
information and
Note:
emphasizes general information
worthy of special attention.