New Holland 716523006, Руководство оператора, Страница: 16 / 20

16
•
Cut tall grass and weeds with the mower in its highest
position, making a second pass cutting at desired height.
•
Regularly clean the mower of any buildup of grass
clippings.
•
Use low range or reduce ground speed when mowing in
heavy conditions or when mulching or bagging.
Replacing the Blade Drive Belt
Removing the Blade Drive Belt
1. Remove the mower; refer to Removing the Mower,
page 10.
2. Remove the pulley cover mounting screws and pulley
covers from the blade pulleys.
3.
Push on the idler to release tension and remove the belt
from the pulleys (Fig. 31).
m--3524
1
2
Figure 31
1. Idler 2. Belt
Installing the Blade Drive Belt
1. Install the new belt around the blade pulleys and the
idler pulleys.
2.
Install the left and right pulley covers with the
mounting screws (Fig. 31).
3. Install the mower; refer to Installing the Mower,
page 4.
Storage
1.
Clean dirt and chaff from the outside of the engine’s
cylinder head fins and blower housing. Also remove
grass clippings, dirt, and grime from the external parts
of the entire machine, especially the engine, shrouding,
and the top of the mower.
Important
You can wash the machine with mild
detergent and water. Do not pressure wash the machine.
Avoid excessive use of water, especially near the
control panel, lights, engine, and the battery.
2. Scrape heavy buildup of grass and dirt from the
underside of the mower. Then wash the mower with a
garden hose.
3. Check the condition of the blade(s); refer to Cutting
Blade, page 13.
4. Check the condition of the blade drive belt.
5.
Grease the mower deck; refer to Greasing the Blade
Spindles, page 15.
6. Check and tighten all bolts, nuts, and screws. Repair or
replace any part that is damaged or defective.
7. Paint all scratched or bare metal surfaces. Paint is
available from your Authorized Service Dealer.
8. Store the machine in a clean, dry garage or storage area.
Remove the keys and keep them in a memorable place.
9.
Cover the machine to protect it and keep it clean.