New Holland 715648006, Руководство оператора

Страница: 6 / 16

6
10. Close the latch by rotating it back until the release
button pops out to lock it in place (Fig. 9).
2
m–3272
1
3
4
Figure 9
1. Front attachment arm
2. Front hitch
3. Release button
4. Latch arm
11. Place the lift rod into the lift arm and secure it with a
large hairpin cotter (Fig. 10).
m–3267
3
2
1
Figure 10
1. Lift arm
2. Lift rod
3. Hairpin cotter, large
12. Set the Dial-A-Height indicator to the Mounting
Position, and lower the attachment lift all the way.
13. Position the notch in the lift plate around the left side
tractor lift arm and slide the lift plate onto the
attachment lift arm (Fig. 11).
14. Secure the lift plate with a hairpin cotter from a
mower (Fig. 11).
15. Thread the trunnion onto the lift rod and insert it into
one of the holes in the attachment lift plate.
16. Secure the trunnion with a 9/16 in. washer and
medium hairpin cotter (Fig. 11).
Note: The low hole provides the maximum blade lift, but
requires the greatest lift effort. The top hole requires less
lift effort, but has a lower lift height.
Note: Blade height can be adjusted between hole positions
by removing the trunnion from the lift plate hole,
repositioning it up or down the lift rod, and attaching back
to the lift plate.
1265
1
7
2
6
4
3
8
5
Figure 11
1. Notch
2. Lift plate
3. Lift arm
4. Hairpin cotter–from mower
5. Lift rod
6. Trunnion
7. Washer, 1/2 in.
8. Hairpin cotter–medium
Installing the Control Handle
1. Attach the control handle to the pivot support using
the 1/2-13 x 1 in. (25 mm) pivot bolt. Screw the bolt
into the pivot support until the handle is snug and then
back it off slightly to let the handle pivot freely
(Fig. 12).