New Holland 715648006, Руководство оператора

Страница: 10 / 16

10
1205
3
2
4
5
6
1
Figure 21
1. Lift lever
2. Button
3. Dial-A-Height control
4. Indicator
5. High
6. Mounting position
Raising the Blade Using the Attachment
Lift Switch
1. Turn key to the On or Run position (Fig. 20).
2. Push the lift switch in the up direction to raise the
attachment lift (Fig. 20).
Lowering the Blade Using the
Attachment Lift Switch
1. Turn key to the On or Run position (Fig. 20).
2. Push the lift switch down to lower the attachment lift
(Fig. 20).
Raising the Blade Using the Attachment
Lift Lever
1. Stop the machine.
2. Pull the attachment lift lever rearward until the blade
raises and the latch locks.
Lowering the Blade Using the
Attachment Lift Lever
1. Stop the machine.
2. Pull attachment lift lever rearward, to release lift
pressure and push the button on top to release the
latch.
3. Move the lift lever forward to lower the blade.
Adjusting Dial-A-Height
The Dial-A-Height control (Fig. 21) is used to adjust the
downward travel of the attachment.
1. Raise the attachment lift.
2. Rotate the Dial-a-Height knob to change the stop
location.
Turn the knob clockwise to raise and counterclockwise
to lower the height of the attachment.
The Dial-A-Height indicator (Fig. 21) will show the
change, high to low, in attachment lift height as the
adjustment is made.
Adjusting the Blade Angle
You can turn the blade from side to side, in 5 positions.
You control the angle using the control handle on the right
hand side of the frame (Fig. 22).
1. Squeeze the release lever toward the handle (Fig. 22).
1477
2
1
Figure 22
1. Handle 2. Release lever
2. Push or pull the lever to change the angle.
3. Release the lever and pull or push the handle until the
locking pin on the blade snaps into place.
Adjusting the Blade Trip
Springs
You can mount the blade trip springs in four positions.
The top hole provides the greatest scraping pressure and
the bottom hole provides the least scraping pressure
(Fig. 23). New Holland recommends using the second
hole from the top for removing snow.