New Holland 140TL, Оригинальное руководство пользователя

Страница: 68 / 86

5 - MAINTENANCE
MAINTENANCE CHART
Maintenance planning
Lubricate Check
Maintenance action Page no.
Every 8 hours or daily
Front loader and bucket - Lubricate
x
5-6
DAILY
Tractor hydraulic oil reservoir - Check
x
5-6
After the first 10 hours of operation
Hardware - Check
x
5-6
50 hours
Hardware - Check
x
5-7
Every 8 hours or daily
Front loader and bucket - Lubricate
Grease Locations
Lubricate the 12 grease fittings after every 8 hours of
operation. As illustrated below; these fittings are found
at the rear of each lift arm, for bucket pivot, as well as
at the rod and barrel end of each cylinder.
The 12 grease points are shown below. They are found
on both sides of the loader in the identified locations.
NHIL15CT00484AA
1
DAILY
Tractor hydraulic oil reservoir - Check
Daily Maintenance
When using the tractor's hydraulic system to operate
the loader, check the level of hydraulic oil in the tractor
before the start of each day's operation. If necessary,
add
H
YDRAULIC
T
RANSMISSION
O
IL
- P
REMIUM
.
After the first 10 hours of operation
Hardware - Check
Check all loader mount hardware after 10 hours of op-
eration and every 50 hours of operation thereafter.
5-6