New Holland 140TL, Оригинальное руководство пользователя

Страница: 22 / 86

2 - SAFETY INFORMATION
Make sure that the SMV emblem is visible.
Make sure that the brake pedal latch is engaged. You
must lock brake pedals together for road travel.
Use safety chains for trailed equipment when safety
chains are provided with machine or equipment.
Lift implements and attachments high enough above
ground to prevent accidental contact with road.
When you transport equipment or a machine on a trans-
port trailer, make sure that it is properly secured. Be sure
the SMV on the equipment or machine is covered while
being transported on a trailer.
Be aware of overhead structures or power lines and make
sure that the machine and/or attachments can pass safely
under.
Travel speed should be such that you maintain complete
control and machine stability at all times.
Slow down and signal before turning.
Pull over to allow faster traffic to pass.
Follow correct towing procedure for equipment with or
without brakes.
Seat belts
Seat belts must be worn at all times.
Seat belt inspection and maintenance:
• Keep seat belts in good condition.
• Keep sharp edges and items than can cause damage
away from the belts.
• Periodically check belts, buckles, retractors, tethers,
slack take-up system, and mounting bolts for damage
and wear.
• Replace all parts that have damage or wear.
• Replace belts that have cuts that can make the belt
weak.
• Check that bolts are tight on the seat bracket or mount-
ing.
• If the belt is attached to the seat, make sure that the
seat or seat brackets are mounted securely.
• Keep seat belts clean and dry.
• Clean belts only with soap solution and warm water.
• Do not use bleach or dye on the belts because this can
make the belts weak.
2-4