New Holland 140TL, Оригинальное руководство пользователя

Страница: 55 / 86

4 - WORKING OPERATIONS
Operating with float control
The bucket will wear faster if hydraulic down pressure is
exerted during loader operation. To prevent this from oc-
curring, keep the bucket level and put the lift control in the
float position during hard surface operation, allowing the
bucket to float on the working surface.
NHIL13CT00870AA
10
Utilizing the float position also helps prevent the mixing of
surface material with stockpile material. This is because
the float position reduces the chance of surface gouging
when removing snow or other material, or when working
with a blade.
(1) Surface material.
NHIL13CT00871AA
11
Loading from a bank
Choose a forward gear that provides sufficient ground
speed for loading.
Load from the lowest position possible for maximum ef-
ficiency. Loader lift and breakaway capacity diminish as
loading height is increased.
NHIL13CT00872AA
12
WARNING
Falling objects!
Dirt slides can be dangerous.
Exercise ex-
treme care when undercutting high banks.
Watch for falling rocks and cave-ins.
Failure to comply could result in death or se-
rious injury.
W0021A
Side-cutting is a good technique for cutting down a large
pile of material.
NHIL13CT00873AA
13
4-5