NEW BRUNSWICK SCIENTIFIC BioFlo 4500, Руководство по эксплуатации

Страница: 40 / 214

BioFlo 4500 M1254-0050 User’s Guide
40
Additionally, some units have a
BIOCOMMAND LAN PORT
for communications to
BioCommand through a local area network (LAN).
4.6 Analog Inputs
There are three sets of 0-20 mA inputs on the rear panel of the console to connect
analyzers or other external devices. These inputs are connected to the controller
and can be integrated into the system as control loops.
The connections to these inputs are as follows:
Pin 1 Pin 2 Pin 3
-
Figure 11: External Analog Inputs
NOTE:
The "J" designations refer to jumper
locations on the General Purpose I/O
Module of the ML-6100 controller (
refer to
the ML-6100 specifications ).
The local controller software used with the
controller
displays input and output
connections as "J" numbers.
The slot number, in this case, 2, refers to
installed position of the I/O module in the
ML-6100 controller.