manualshive.com logo in svg

Neve Custom Series 75, Руководство пользователя

Поделиться
Скачать
Neve Custom Series 75 Скачать руководство пользователя страница 25

25

reTrO - Routes the Channel path to the Channel 

retro Output stage or Channel Modern Output stage 

before they join either the Voltage summing or Current 

summing Bus respectively.

Keep in mind that the above functions can also be 

changed on a per Channel basis in the Channel/Monitor 

Modules section.

This setup is highly flexible, with a little thought, almost 

anything is possible.

FDr swaP - Globally swaps the Channel Path Faders 

with the Monitor Path Rotaries. This may be useful for 

users who prefer to record with Monitor Path Rotaries 

controlling the 'to tape' levels, and faders controlling the 

'from tape' levels.

Note: This function swaps the level controls only. Solos, 

Cuts, Select, Line and Retro buttons on each module 

remain unchanged. Also, Fader Swap can be engaged on 

individual modules by depressing the HPF Selector in the 

Input section of each module.

MOn 

→

 MaIn - Routes the signal that is present at the 

Monitor Mix Fader to the Main Mix Outputs, via the Main 

Mix Fader. This may be useful for bouncing rough mixes 

whilst recording. It may also be useful when recording a 

mix back to the DAW - including effects that have been 

returned to the Monitor path.

MIX Ins - Activates the patchable Insert over the Main 

Mix. Note: The send is always active.

Содержание Custom Series 75

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды