Installation
23
2.3. Unpacking and Check of Delivery Set
In case the box with the digital EEG system was under conditions of the excessive
moisture or low temperature which differs vastly from the working conditions, it is
necessary to place it in the room and leave for 24 hours in normal conditions.
Unpack the box and take out the digital EEG system components. The delivery set
should correspond to the packing report.
The computer equipment packed in the separate boxes should be opened according
to user and technical manuals for these products.
Check the digital EEG system components to make sure that there is no external
damage.
2.4. Connection to Computer
Place the computer and digital EEG system units according to your plan and connect
the computer equipment according to the schematics described in the operational
documentation for these products.
If you purchase the digital system together with the computer, the equipment is
delivered with installed and configured software. If you purchase the digital system
separately, please install the software from the compact disk (included in the delivery
set) to computer.
The software must be installed before the first connection of digital system
to the computer. Study carefully the corresponding paragraph of the user
manual before starting to work.
Assemble the stand. Fix the electronic unit on this stand.
According to its technical manual included in the delivery set.
Place the electronic unit on the stand as it is shown on Fig. 7.
Assemble the photic stimulator on the stand.
Insert the photic stimulator cable into the
connector on top side panel of the
electronic EEG unit. The slot
on the top side panel of digital EEG system is used for
the auditory stimulator connection. The slot
is used for the pattern-stimulator
adapter connection.
Insert EEG cables into the Fp1,…O2, A1, A2, Ref connectors and grounding jacks
located on the digital EEG unit front panel.
Connect some other sensors and electrodes required for the operation to digital EEG
unit.
