3
3. Product Character
Fully IEEE 802.15.4 compliant (ZigBee Pro)
Utilizes 2.4GHz ISM band, up to 16 channels
Wireless transmission is up to 200 meters linear distance in open field
Simple operation and device configuration
Lithium rechargeable battery
4.
Setting up
4.1 Turn on / turn off device
In the "OFF" state, press the "Binding button" for 3 seconds till device vibrates once prompted, after releasing the
button, the device goes into the "ON" state. If the device has not been added to the Internet, the device will
automatically start searching for the Internet. If there is no Internet access, the device will return to the "OFF" state.
If the device has found the network or has been to the Internet, it will remain "ON".
In the "ON" state, long press "Binding key" for 15 seconds (the indicator flashes one time on 2nd , 10th second),
the device will prompt by vibration at 15th second, and release the button; the device will vibrate once to enter the
" OFF" state.
Note: Power off Z307 when not in use is recommended
4.2 Join to the Network
In order for the Z307 to communicate with the ZigBee network, it needs to be added to the ZigBee network first.
Operations are as follows:
①
Enable permit-join function of coordinator or router in the same channel with Z307.
②
Press “Binding Key”for 3 seconds to make the Z307 enter "power-on" state. The device will then actively look for
the network and request to join the network of the channel where it is located. The network indicator flashes once to
prompt each matched network searching.
③
If joining to the network is successful, the network indicator flashes 5 times, or no action light. If the time is out
to join in the network (about 3min), then it returns to the "off" state. To request joining to network, just repeat the first
two steps.
Note: During joining network process of Z307, please ensure that the coordinator and router on the network are in
the power supply status until the device completes the registration.
