background image

2

1. Introduction

RB11E is a long distance wireless infrared device based on the LoRaWAN protocol (Class A). RB11E combines infrared detection, temperature, and
illumination sensors. During infrared real-time detection, if a people or other organism which is active in the monitoring area, RB11E will detect the
infrared signal and report status information to the gateway. Users can execute different instructions or scenes according to the different status
configuration. RB11E also supports temperature, lighting report.

LoRa Wireless Technology:
LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other communication methods,
LoRa spread spectrum modulation method greatly increases to expand the communication distance. Widely used in long-distance, low-data wireless
communications. For example, automatic meter reading, building automation equipment, wireless security systems, industrial monitoring. Main
features include small size, low power consumption, transmission distance, anti-interference ability and so on.

LoRaWAN:
LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and gateways from different
manufacturers.

This device has been certified by the LoRa Alliance and is licensed to use the following logo on the product:

2. Appearance

\

Indicator

Red / Green

Function Key 1

Function Key 2

I

nfrared Sensor

Infrared Sensitivity Adjustment Knob

Case

Open Button

Содержание RB11E












Отзывы: