background image

 

 

3. Main Features 

 

Compatible with LoRaWAN 

 

2 section 3V CR2450 button battery powered 

 

Report voltage status, vibration of duration  

 

 

Compatible with LoRaWANTM Class A 

 

Frequency hopping spread spectrum technology 

 

Configuration parameters can be configured through third-party software platforms, data can be 
read and alarms can be set via SMS text and           email (optional) 

 

Available third-party platform: Actility / ThingPark, TTN, MyDevices/Cayenne 

 

Low power consumption and long battery life 

 

 

4.Set up Instruction 

4.1 Power on and Turn on / off   

 

(1)

 

Power on.

 Open the battery cover (users may need a flat blade screwdriver to open); insert two 

sections of 3V CR2450 button batteries and close the battery cover. 
(2)

 

Turn on.

 If the device had never joined in any network or at factory setting mode, after powering 

on, the device is at off mode by default setting. Press function key and release to turn on the device. 
The green and red indicator will flash once to show that R311FC is turned on.   
(3)

 

Turn off.

 Press and hold function key for 5 seconds till the green indicator flashes quickly and 

release. The green indicator will flash 20 times to show that R311FC is turned off.       
(4)

 

Remove batteries (power off) when R311FC is on. Wait till 10 seconds after the capacitance 

discharging. Insert batteries again, R311FC will be setted to be on mode by default. There is not 
need to press function key to turn on the device. The red and green indicators will both flash and 
then light off.     
 
Note:   
1. The interval between turning on/off  or powering  off/on is suggested to be about 10  seconds  to 
avoid the interference of capacitor inductance and other energy storage components. 
2. Do not press function key and insert batteries in the same time, otherwise, it will enter engineer 
testing mode.   

4.2 Join Into Lora Network   

To join R311FC into LoRa network to communicate with LoRa gateway. 
  The network operation is as following: 
(1)

 

If R311FC had never joined any network or at factory setting mode, turn on the device; it will 

search an available LoRa network to join. The green indicator will stay on for 5 seconds to show it 
joins into the network, otherwise, the green indicator does not work. 

Содержание R311FC













Отзывы: