5
4.
Set up Instruction
On/Off
Power on
Insert two sections of 3V CR2450 button batteries and close the battery cover
Turn on
Press any function key till the green and red indicator flash once.
Turn off
(Restore to factory setting)
Press and hold the function key for 5 seconds till the green indicator flashes for
20 times.
Power off
Remove Batteries.
Note:
1.
Remove and insert the battery; the device memorizes previous on/off
state by default.
2.
On/off interval is suggested to be about 10 seconds to avoid the
interference of capacitor inductance and other energy storage components.
3.
Press any function key and insert batteries at the same time; it will enter
engineer testing mode.
Network Joining
Never joined the network
Turn on the device to search the network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
Turn on the device to search the previous network to join.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send
request.
Note: Suggest to remove batteries if the device is not used to save power.
Suggest to check device verification on gateway.
