12
6. Installation
1.Remove the 3M adhesive on the back of the
Activity Detection Sensor and attach the body to
the surface of a smooth object (please do not stick
it to a rough surface to prevent the device from
falling off after a long time use).
Note
：
Wipe the surface clean before installation to
avoid dust on the surface to affect the
adhesion of the device.
Do not install the device in a metal shielded
box or other electrical equipment around it to
avoid affecting the wireless transmission of
the device.
2. The device detects a sudden movement or
vibration, and it will immediately sends a report.
After the vibration alarm, the device waits for a
certain period of time (DeactiveTime- default : 5
seconds,can be modified) to enter the quiescent
state before starting the next detection.
Note
：
If the vibration continues to occur during this
process(quiescent state),than it will delay 5
seconds until it enters the quiescent state.
When the vibration alarm is generated, the
alarm bit of the data is "1",quiescent state bit of
the data is "0"
Activity Detection Sensor (R311FA) is suitable for
the following scenarios:
Valuables (Painting, Safe)
Industrial Equipment
Industrial Instrument
Medical Instruments
When it necessary to detect a possibility of the
valuables are moved and the motor running.
