Netstor | 31
CLI Command
========================================================================
NAME SPEED CODE RPM STATUS
Fan 01 5 2100 OK
Fan 02 5 2200 OK
Fan 03 Not-Installed
Fan 04 Not-Installed
Temperature Element (0x04):
========================================================================
NAME ID CT(‘C) HTW LTW OTWarn
ENC. Temp 01 32 60 5 No
Chip Temp 02 42 85 5 No
Voltage Element (0x12):
========================================================================
NAME VOLT(V) OVLMT UVLMT STATUS
1V 0.99 1.07 0.94 None
5V 4.96 5.32 4.63 None
PowerSupply Element (0x02):
========================================================================
NAME STATUS
PowerSupply01 OK
PowerSupply02 OK
AudibleAlarm Element (0x06):
========================================================================
NAME STATUS ALMSTATE
Audible-Alarm Normal 0
CLI>
• SHOWLOGS Command
The showlogs command allows you to display system event notifications that have been
generated by 6Gb/s SAS JBOD enclosure.
Syntax
CLI>showlogs [DisplayMode(hex, detail, default)]
Example: