Netstor | 15
Navigation Map of the LCD
• Alarm Device
Show which device that fail to work, its sub-items could be "Power Supply", "Fan", "Temp.
Sensor" and "Voltage Sensor".
• Voltage
Show enclosure chip voltage in status data, represent in V.
The sub-items are shown as below:
1.2V- , 6Gb/s SAS JBOD enclosure voltage is 1.2V
5V- , 6Gb/s SAS JBOD enclosure voltage is 5V
For the setup item, the LCM keys represent:
Up key to enter the 0 - 9 data.
Down key to enter "a" - "z" and "A" - "Z" data.
Enter key to confirm the input or ready to update a sub-item data.
Esc / Exit key to go back to the main selection.
• Set Link
Set HDD devices maximun/minimun link speed rate. the value could be 6.0G, 3.0G or 1.5G
each of HDD devices link speed will have the sub-items are shown as below:
_Set Max. Rate
6.0G
_Set Min. Rate
1.5G
• Set Alarm
Set enclosure buzzer warning/critical error beep style or mute the current beep. The value
could be "Sound 1", "Sound 2", "Sound 3", "Sound 4" and "Sound Disabled". Sound 1 to 4
means different frequency sound. Sound disabled means disable the sound beep. The
sub-items are shown below:
_Set Alarm Beep
Mute beep
Warning Alarm
_Sound 2
_Critical Alarm
Sound 3
