RangeMax Wireless-N 150 Router WPN824N User Manual
Configuring Basic Connectivity
1-13
v1.0, February 2010
It should not be necessary to change the wireless channel unless you notice interference
problems with another nearby wireless router or access point. Select a channel that is not
being used by any other wireless networks within several hundred feet of your router. For
more information about the wireless channel frequencies, click the link to the online
document
“Wireless Networking Basics” in Appendix B
.
•
The default mode is
Up to 150Mbps
. The options are:
–
Up to 54 Mbps – Legacy Mode – Maximum speed of up to 54 Mbps for b/g networks.
–
Up to 65 Mbps – Neighbor Friendly Mode – Will not interfere with neighboring
wireless networks.
–
Up to 150 Mbps – Performance Mode – Maximum Wireless-N speed up to 150 Mbps.
•
The default Security Options is
None
.
5.
Click
Apply
to save your changes.
6.
Select
Wireless Settings
under Advanced in the main menu of the WPN824N router.
7.
Make sure that the
Enable Wireless Router Radio,
Enable SSID Broadcast,
and
Enable
WMM
check boxes are selected.
8.
Click
Setup Access List
.
Note:
If you are configuring the router from a wireless computer and you change the
router’s SSID, channel, or security settings, you will lose your wireless
connection when you click
Apply
. You must then change the wireless settings
of your computer to match the router’s new settings.
Figure 1-11
