RangeMax Wireless-N 150 Router WPN824N User Manual
Using Network Monitoring Tools
6-14
v1.0, February 2010
1.
On the Advanced Menu, click
Network Monitor Display Settings
..
2.
Click the
Turn Off LED
button. (This setting is also a toggle. Clicking it again turns back on
the LED.)
3.
Click
Apply
.
Setting the Dome LED Display
You can set the blue Dome LEDs to monitor and display the following statuses:
•
Wireless data status
– This is the default setting. The LEDs blink when wireless data is being
transmitted. The left LED shows incoming data and the right LED shows outgoing data.
•
Guest Network status
– The LEDs are both on when Guest Network is enabled, and blink
when a computer is connected to the Guest Network.
•
Live Parental Controls status
– The LEDs are both on when Live Parental Controls is
enabled, a blink when an attempted access is blocked.
•
Broadband Usage Meter status
– The LEDs blink when usage reaches the warning level and
remain on when the usage reaches the pre-set limit.
Click
Apply
to save your display settings.
Figure 6-11