Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Preparing Your Network
C-15
February 2005 (202-10034-03)
Verifying TCP/IP Properties for Windows XP, 2000, and NT4
To check your PC’s TCP/IP configuration:
1.
On the Windows taskbar, click the Start button, and then click Run.
The Run window opens.
2.
Type
cmd
and then click OK.
A command window opens
3.
Type
ipconfig /all
Your IP Configuration information will be listed, and should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends for connecting through a
router or gateway:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0
• The
TCP/IP Properties
dialog box now
displays.
• Click the
IP Address
tab
.
• Select the radio button marked
Obtain an IP
address from a DHCP server.
• Click
OK
. This completes the configuration
of TCP/IP in Windows NT.
Restart the PC.
Repeat these steps for each PC with this version
of Windows on your network.
Содержание WGR101
Страница 6: ...February 2005 202 10034 03 vi...
Страница 14: ...Reference Manual for the 54 Mbps Wireless Travel Router WGR101 4 About This Manual February 2005 202 10034 03...
Страница 22: ...Reference Manual for the 54 Mbps Wireless Travel Router WGR101 2 8 Introduction February 2005 202 10034 03...