Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Preparing Your Network
C-17
February 2005 (202-10034-03)
2.
If not already selected, select Built-in Ethernet in the Configure list.
3.
If not already selected, Select Using DHCP in the TCP/IP tab.
4.
Click Save.
Verifying TCP/IP Properties for Macintosh Computers
After your Macintosh is configured and has rebooted, you can check the TCP/IP configuration by
returning to the TCP/IP Control Panel. From the Apple menu, select Control Panels, then TCP/IP.
The panel is updated to show your settings, which should match the values below if you are using
the default TCP/IP settings that NETGEAR recommends:
•
The IP Address is between 192.168.0.2 and 192.168.0.254
•
The Subnet mask is 255.255.255.0
•
The Router address is 192.168.0.1
If you do not see these values, you may need to restart your Macintosh or you may need to switch
the “Configure” setting to a different option, then back again to “Using DHCP Server”.
Содержание WGR101
Страница 6: ...February 2005 202 10034 03 vi...
Страница 14: ...Reference Manual for the 54 Mbps Wireless Travel Router WGR101 4 About This Manual February 2005 202 10034 03...
Страница 22: ...Reference Manual for the 54 Mbps Wireless Travel Router WGR101 2 8 Introduction February 2005 202 10034 03...