background image

ReadyNAS Ultra 2, Ultra 2 Plus, Pro 2

11

 ReadyNAS Desktop Storage Systems

Status Information

You can obtain information about the status of your unit by reviewing the indicators listed in 
the following table.

Indicator

Description

Power button and LED

Press this button to turn on the ReadyNAS. The LED has these states:

• 

Blinking

. Booting

• 

Blue

. Powered on

• 

Off

. Powered off

Disk LEDs (1, 2)

Each disk bay has an LED associated with it on the front panel of the unit. The 
disk LEDs have these states:

• 

On

. Power is on and the disk is operating normally.

• 

Blinking

. The disk was removed, failed, or is resynchronizing. 

• 

Off

. The disk bay is empty.

Disk activity LED

The disk activity LED has these states:

• 

Blinking green

. A disk is active.

• 

Off

. No disks are active.

Rear panel Ethernet ports

Two LED status indicators are built into these ports. One LED indicates port 
activity. The other LED indicates connection speed as follows:

• 

Green

. The port is operating at 1,000 Mbps.

• 

Amber

. The port is operating at 100 Mbps.

• 

Off

.

 

The port is operating at 10 Mbps.

System Shutdown

You can shut down your unit in these ways:

•     

Using the Power button

•     

Preferred shutdown

. Press the 

Power

 button twice initiate a graceful shutdown.

•     

Forced shutdown

. If the unit is hung, press the 

Power

 button and hold for 5 seconds 

to force shutdown.

•     

Using FrontView

. For information about using FrontView to shut down your ReadyNAS 

Ultra series or ReadyNAS Ultra Plus series storage system, see the 

ReadyNAS for Home 

Software Manual

. For information about using FrontView to shut down your ReadyNAS 

Pro series storage system, see the 

ReadyNAS for Business Software Manual

. Both 

documents are available at 

http://www.readynas.com/?cat=40

.

Содержание ReadyNAS Ultra 2













































Отзывы: