Maintenance
27
NETGEAR ReadyDATA 5200
Replace a Disk
If a disk fails, your system provides email alerts and status messages about the need to
replace a disk. You do not need to power down your unit when replacing a disk.
To replace a 2.5-inch disk:
1.
If a disk failed, scan disk LEDs on the disk bays to identify the failed disk.
2.
Pull the disk tray release pull switch.
The tray handle pops out.
1
2
1. Disk tray handle
2. Disk tray release pull switch
3.
Pull out the disk tray, turn the disk over, remove the screws, and separate the metal plate
and the disk tray.
