Getting Started
10
NETGEAR ReadyDATA 5200
7.
Press and release the
Reset
button to scroll through the boot menu options.
Watch the blink pattern of the power diagnostic LED and the information LED. The
following table shows the how the system displays the current option using the power
diagnostic LED and information LED.
Boot Mode
Power Diagnostic LED and Information LED Blink Pattern
Normal
Factory default
OS reinstall
Tech support
Memory test
Legend:
•
Left: Power diagnostic LED
•
Right: information LED
•
Off:
•
On:
8.
When the power diagnostic LED and information LED indicate the correct boot mode, press
and hold the
Reset
button for 3 seconds to select that boot mode.
The system confirms the selection by blinking the power diagnostic LED and the
information LED twice, and then begins to boot the system in the selected boot mode.
