Maintenance
29
NETGEAR ReadyDATA 5200
To replace a 3.5-inch disk:
1.
If a disk failed, scan disk LEDs on the disk bays to identify the failed disk.
2.
Pull the disk tray release pull switch.
The tray handle pops out.
1
2
1. Disk tray handle
2. Disk tray release pull switch
3.
Pull out the disk tray, remove the screws, and remove the old disk drive.
4.
Replace the disk drive and reassemble the disk tray.
For more information, see
Add a Disk
on page 23.
5.
Slide the disk tray back into the unit and secure the handle.
