Maintenance
22
NETGEAR ReadyDATA 5200
Disks
The ReadyDATA 5200 does not recognize non-NETGEAR disks. In addition, if you use
non-NETGEAR disks, Dashboard might display an error. The ReadyDATA 5200 can
recognize only disks that you obtain through NETGEAR or a NETGEAR authorized reseller.
Failed Disk Notification
When a disk fails in your ReadyDATA 5200, you are notified by email. Email alerts must be
set up for notifications to be sent. In addition, Dashboard provides information about the
failed disk.
For information about setting up email alerts and using Dashboard, see the
ReadyDATA OS
Software Manual
, which is available at
support.netgear.com
.
Each disk bay includes a failed disk LED that illuminates when its disk fails.
If the disk is still under warranty, contact NETGEAR and arrange to have the disk replaced.
This process requires that you provide the serial number of the disk. To locate the serial
number, open the disk tray and take out the failed disk, or use Dashboard.
WARNING:
No matter how many hard drives are installed in your unit, ensure
that all drive trays remain in the drive bays to maintain adequate
airflow.
