NETGEAR Stora User Manual
Getting Acquainted
1-25
v1.0, September 2009
To Replace the Disk:
1.
View the disk status lights to identify which disk has
failed.
2.
If necessary, unlock the tray lock by moving it to the
right, then press the release of the failed disk. The
latch pops out.
3.
Pull out the disk, and replace the failed disk.
4.
Slide the disk tray back into the unit and secure the
latch.
To Check Disk Status or Rebuild a Disk:
1.
Open the Stora application user interface.
2.
Click
Preferences
.
3.
Navigate to
Administration > RAID a
nd locate the
Rebuild
button.
a.
If a rebuild button shows on the screen, click it to find the status of the disk.
b. If no rebuild button shows on the screen, the disk is working properly.
4.
If the disk is bad, replace it. See
“RAID”
on page 3-57 for more information.
Note:
To protect against data loss, add a second disk to your Stora to be used as a
mirrored backup of the data on the first disk.
Figure 1-19 Rebuild a Disk
Figure 1-18 Disk Release Latch
