NETGEAR Stora User Manual
Getting Acquainted
1-9
v1.0, September 2009
LED, Power, Socket, and Connector Descriptions
The function of each Stora item is described in the following table:
Table 1-2. LED and Connector Descriptions
Item
Activity
Description
Power
Button
Push button on
back of unit to
turn the on and
off.
Turn on the Stora system: Press once.
Turn off the Stora system:
Turn unit off. To correctly shutdown your Stora, press and hold
the power button for about 5 seconds. The blue light on the
front panel will blink before shutting off. If the unit is hung,
press and hold the power button to force shutdown.
Power
Status LED
LED located on
front of unit
Solid Blue: Power is on.
Blinking Blue: The Stora is booting up or shutting down.
No LED light: The system is powered off.
Disk 1: Top
Disk 2: Bottom
LEDs
LED status
indicators for
Disk 1 and Disk
2 located on
front of unit.
On: Disk installed
Solid Green: Drive is operating normally.
Blinking Green: The Stora is booting up or shutting down. Also
indicates activity such as copying data.
Solid Amber: Indicates a problem with the drive.
Off: No disk installed.
USB Port
Plug an external
device into the
USB Port
Connect a USB drive and printer.
There is no LED associated with the USB port.
Ethernet
port
Plug ethernet
cable into port
located on back
of unit.
Ethernet Connection LEDs on the back:
Solid Amber: Indicates a 10/100M connection.
Solid Green: Indicates a 1G connection.
Blinking Green or Amber: Indicates link activity.
Power
cable socket
Plug power
cable into
socket located
on back of unit.
Plug in the Stora system.
There is no LED associated with the power cable socket.
Reset
button
Plug in the Stora system.
There is no LED associated with the power cable socket.
