NETGEAR HR314 - Wireless Router, Справочное руководство

Страница: 46 / 123

Reference Manual for the Model HR314 802.11a Hi-Speed Wireless Router
4-6 Basic Configuration of the Router
3.
Router’s MAC Address: This section determines the Ethernet MAC address that will be used
by the router on the Internet port. If your ISP allows access by only one specific PC’s Ethernet
MAC address, select "Use this MAC address". The router will then capture and use the MAC
address of the PC that you are now using. You must be using the one PC that is allowed by the
ISP.
Some ISPs will register the Ethernet MAC address of the network interface card in your
PC when your account is first opened. They will then only accept traffic from the MAC
address of that PC. This feature allows your router to masquerade as that PC by using its
MAC address.
4.
Click on Apply, then proceed to “Completing the Configuration“ on page 4-9 .
Configuring for Fixed IP Accounts
If the Setup Wizard determines that your Internet service account uses Fixed IP assignment, you
will be directed to the menu shown in
Figure 4-4 below:
Figure 4-4. Setup Wizard menu for Fixed IP address
1.
Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP’s gateway
router. This information should have been provided to you by your ISP.
2.
Domain Name Server (DNS) Address: If you know that your ISP does not automatically
transmit DNS addresses to the router during login, select “Use these DNS servers” and enter
the IP address of your ISP’s Primary DNS Server. If a Secondary DNS Server address is
available, enter it also.