10. To enable the LAG for which you just set up the port membership, do the following:
a. Select System > LAG > LAG Configuration.
b. Select the LAG ID of the LAG for which you just set up the port membership.
c. In the Admin Mode menu, select Enable.
d. In the LAG Type menu, select Static.
The Port Member field for the selected LAG ID shows the ports that you selected
inStep 8.
The LAG Status field for the selected LAG ID shows whether the LAG is established
(Up) or not established (Down).
e. Click the Apply button.
Your settings are saved.
Set up a Link Aggregation Control Protocol group
The switch can support eight LAGs, which can be a combination of Link Aggregation
Control Protocol (LACP) groups and static link aggregation groups.
To specify an LACP group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 7.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
User Manual
53
Manage Network Settings
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
