5. Select System > Management > Switch Management Mode.
The Switch Management Mode page displays.
6. Select the Disable radio button.
By default, the Enable radio button is selected.
7. Click the Apply button.
Your settings are saved.
Manage automatic denial of service
Automatic denial of service prevention mode (Auto DoS prevention mode) enables all
the DoS features. By default, Auto DoS prevention mode is enabled but you can disable
it. We recommend that you keep the Auto DoS prevention mode enabled.
The TCP and UDP ports are always enabled, but you can shut down individual ports
(see Manage the port speed and the port status on page 60).
To manage the Auto DoS prevention mode:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Access the switch using a web
browser on page 7.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Management > Denial of Service.
The Auto-DoS Configuration page displays.
6. Select one of the following radio buttons:
•
Enable. Enables the Auto DoS prevention mode.
•
Disable. Disables the Auto DoS prevention mode.
User Manual
43
Manage Security
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
