The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select System > Multicast.
6. Select the IGMP Snooping Status Enable radio button.
By default, the Enable radio button is selected.
7. In the VLAN ID Enabled for IGMP Snooping field, enter the ID of the VLAN.
By default, if you enable IGMP snooping, snooping occurs on VLAN 1. However, you
can enable snooping on any VLAN:
•
For port-based VLANs, you can enter a VLAN ID from 1 to 50.
•
For 802.1Q-based VLANs, you can enter a VLAN ID from 1 to 4094.
8. Click the Apply button.
Your settings are saved.
Enable the Auto-Video configuration
You can enable the Auto-Video VLAN for IGMP snooping only if you enabled port-based
or 802.1Q-based VLANs (see Use VLANS for Traffic Segmentation on page 15). By
default, the Auto-Video VLAN is disabled. The default ID of the Auto-Video VLAN is ID
3, which you cannot change.
To enable the Auto-Video VLAN:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
User Manual
50
Manage Network Settings
48-Port Gigabit Ethernet Plus Switch with 2 SFP Ports Model GS750E
