NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Руководство администратора, Страница: 86 / 246

GS716Tv2 and GS724Tv3 Software Administration Manual
3-22 Configuring Switching Information
v1.0, July 2009
Figure 3-13
Table 3-13. Spanning Tree CST Port Configuration/Status Fields
Field Description
Interface Select one of the physical or port channel interfaces associated with the
VLAN(s) associated with the CST.
STP Status Spanning Tree Protocol Administrative Mode associated with the port or
port channel. Possible values are
Enable or Disable .
Fast Link Specifies if the specified port is an Edge Port with the CST. Possible
values are
Enable or Disable . The default is Disable .
Port State The Forwarding state of this port.
Path Cost Set the Path Cost to a new value for the specified port in the common
and internal spanning tree. It takes a value in the range of 1–
200000000.
Priority The priority for a particular port within the CST. The port priority is set in
multiples of 16. If you specify a value that is not a multiple of 16, the
priority is set to the priority is automatically set to the next lowest priority
that is a multiple of 16. For example, if you set a value between 0 and
15, the priority is set to 0. If you specify a number between 16 and 31,
the priority is set to 16.
External Port Path Cost Set the External Path Cost to a new value for the specified port in the
spanning tree. It takes a value in the range of 1–200000000.