manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Руководство администратора, Страница: 185 / 246

Поделиться
Скачать
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Скачать руководство пользователя страница 185

GS716Tv2 and GS724Tv3 Software Administration Manual

Monitoring the System

6-3

v1.0, July 2009

2.

Click 

Clear Counters

 to clear all the statistics counters, resetting all switch summary and 

detailed statistics to default values. The discarded packets count cannot be cleared.

3.

Click 

Refresh

 to refresh the page with the most current data from the switch.

Octets Transmitted

The total number of octets transmitted out of the interface, including 
framing characters.

Packets Transmitted 
Without Errors

The total number of packets transmitted out of the interface.

Unicast Packets 
Transmitted

The total number of packets that higher level protocols requested be 
transmitted to a subnetwork-unicast address, including those that were 
discarded or not sent.

Multicast Packets 
Transmitted

The total number of packets that higher level protocols requested be 
transmitted to a Multicast address, including those that were discarded 
or not sent.

Broadcast Packets 
Transmitted

The total number of packets that higher-level protocols requested be 
transmitted to the Broadcast address, including those that were 
discarded or not sent.

Transmit Packets 
Discarded

The number of outbound packets which were chosen to be discarded, 
even though no errors had been detected, in order to prevent their being 
delivered to a higher layer protocol. A possible reason for discarding a 
packet could be to free up buffer space.

Most Address Entries Ever 
Used

The highest number of Forwarding Database Address Table entries that 
have been learned by this switch since the most recent reboot.

Address Entries in Use

The number of Learned and static entries in the Forwarding Database 
Address Table for this switch.

Maximum VLAN Entries

The maximum number of Virtual LANs (VLANs) allowed on this switch.

Most VLAN Entries Ever 
Used

The largest number of VLANs that have been active on this switch since 
the last reboot.

Static VLAN Entries

The number of presently active VLAN entries on this switch that have 
been created statically.

Dynamic VLAN Entries

The number of presently active VLAN entries on this switch.

VLAN Deletes

The number of VLANs on this switch that have been created and then 
deleted since the last reboot.

Time Since Counters Last 
Cleared

The elapsed time, in days, hours, minutes, and seconds, since the 
statistics for this switch were last cleared.

Table

 

6-1. Switch Statistics Fields (continued)

Field

Description

Содержание GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Отзывы:

Нет отзывов