manualshive.com logo in svg

NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch, Руководство администратора, Страница: 198 / 246

Поделиться
Скачать
NETGEAR GS716Tv2 - ProSafe Gigabit Managed Switch Скачать руководство пользователя страница 198

GS716Tv2 and GS724Tv3 Software Administration Manual

6-16

Monitoring the System

v1.0, July 2009

The rest of the page displays the Memory Log messages. The following example applies to the 
format of all logged messages which are displayed for the message log, persistent log, or 
console log.

Messages logged to a collector or relay via syslog have an identical format of either type.

<15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237

 

%% Interface 

12 transitioned to root state on message age timer expiry

The example log message above indicates a message with severity 7(15 mod 8) (debug). The 
message was generated by the MSTP component running in thread id 2110. The message was 
generated on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message 
logged.

Example user-level message:

<15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237

 

%% Interface 

12 transitioned to root state on message age timer expiry

The example log message above indicates a user-level message (1) with severity 7 (debug). 
The message was generated by component MSTP running in thread id 2110. The message was 
generated on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message 
logged. Messages logged to a collector or relay via syslog have an identical format to the 
above message.

Number of log messages displayed: For the message log, only the latest 64 entries are 
displayed on the Web page.

2.

Click 

Clear

 to clear the messages out of the buffered log in the memory.

3.

Click 

Refresh

 to update the page with the latest messages in the log.

4.

Click 

Cancel

 to cancel the configuration on the screen and reset the data on the screen to the 

latest value of the switch.

5.

If you change the buffered log settings, click 

Apply 

to apply the changes to the system. To 

preserve the changes after a system reboot, you must perform a save.

FLASH Log Configuration

The FLASH log is a log that is stored in persistent storage, which means that the log messages are 
retained across a switch reboot. 

•

The first log type is the 

system startup log

. The system startup log stores the first N messages 

received after system reboot. This log always has the log full operation attribute set to stop on 
full and can store up to 32 messages. 

Содержание GS716Tv2 - ProSafe Gigabit Managed Switch























































































































































































































































Отзывы:

Нет отзывов