Chapter 1: Getting Started
|
9
ProSafe Unmanaged Plus Switch Configuration Utility User Guide
Default Settings
All ProSafe® Plus Switch features have default settings. You do not need to configure any
settings in order to use the ProSafe® Plus switches. The following table lists the default
values for switch settings. Shaded features are not configurable on all switches.
Tab
Menu
Feature
Default Value
System
Status
Switch Selection
No switch selected
Names
All names blank
Passwords
“password” for all switches
Switch Information
DHCP Mode
Enabled
IP Address
192.168.0.239
Subnet Mask
255.255.255.0
Gateway Address
192.168.0.254
Maintenance
Change Password
All fields blank
Device Reboot
Unchecked
Factory Default
Unchecked
Firmware Upgrade
Filename blank
Monitoring
Port Statistics
0
Mirroring
Disabled
Cable Tester
OK or No Cable for each port
MultiCast
IGMP Snooping Status
Enabled
VLAN IDEnabled for IGMP Snooping
1 (not configurable until VLAN is enabled)
Validate IGMPv3 IP header
Disabled
Block Unknown Multicast Address
Enabled
