manualshive.com logo in svg

NETGEAR FSM726 - ProSafe Managed Switch, Руководство по установке

Поделиться
Скачать
NETGEAR FSM726 - ProSafe Managed Switch Скачать руководство пользователя страница 64

700 Series Software Manual v2.1

5-14

Web-Based Management Interface

 

Click Apply to change the IP settings

Save Configuration to NVRAM and reset the system to implement the changes (Tools > Save 
Configuration).

Set-up> Port Configuration

Figure 5-14:  Port Configuration 

This menu allows you can configure the status of each port.

•

Port:

The port number on the switch

•

Name: 

The name of the port.   This is a user-defined label.

•

Link:

A green triangle pointing up indicates a valid link, while a red triangle 
pointing down indicates no link.

•

On/Off:

Indicates if the port is enabled or disabled by the Administrator.

•

State:

This refers to the Spanning Tree state of the port.  Ports will be Blocking 
(Blk), Listening (Lis), Learning (Lrn), Forwarding (Fwd) or Disabled 
(Dis).

•

Speed:

Indicates the speed and duplex for the port.  The possible entries are 
Auto-negotiation (Auto); 10 Mbps half duplex (10M Half); 10 Mbps full 
duplex (10M Full); 100 Mbps half duplex (100M Half); or 100 Mbps full 
duplex (100M Full). 

Содержание FSM726 - ProSafe Managed Switch





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды