NETGEAR FSM726 - ProSafe Managed Switch, Руководство по установке

Страница: 26 / 156

700 Series Software Manual v2.1
4-8 Administration Console Telnet Interface
Figure 4-10: System Configuration
Main Menu> Set-Up> IP Configuration
This menu manages the IP related information of the system.
IP Assignment Mode . You can manually enter IP-related information:
• Bootstrap Protocol, which allows the switch to discover its own IP address from a BootP
server on the network
• DHCP, which allows the switch to accept DHCP broadcasts from a DHCP server and
automatically configures IP related information
The default setting is DHCP, to enable quick and easy set-up. However, since you need to know
the IP address of your switch to remotely manage it and DHCP assignments can change, change
the IP assignment mode from DHCP to manual after the switch has obtained its IP address.
Figure 4-11: Set-up Manager: IP Configuration
Note : In DHCP mode, if the switch fails to get a DHCP assignment, the switch defaults to
192.168.0.1 as its IP address.
If you are in the manual mode and need to configure the IP information, enter a site-specific IP
address, Gateway Address, and Network Mask (or subnet mask). Consult your network
administrator for the information.
Press Ctrl-W to save any changes to NVRAM.