NETGEAR FSM726 - ProSafe Managed Switch, Руководство по установке

Страница: 116 / 156

700 Series Software Manual v2.1
6-24 Command Line Interface
Syntax.
FSM726(config)# snmp server community <name> [ro | rw |wo | trap]
Where
<name>
= the name of the community
[ro | rw |wo |trap]
= the privilege associated with this community.
ro
= read only.
rw
= read-write access
wo
= read-only
trap
= trap allowed
Contact
You can use the
contact
command to specify contact information for the switch.
Syntax
FSM726(config)# snmp-server contact <contact info>
Where
<contact info>
= the contact information associated with this switch.
Location
You can use the
location
command to describe the location of the switch.
Syntax
FSM726(config)# snmp-server location <location info>
Where
<location info>
= the location of this switch.
Name
Use the
name
command to give a name to the switch. This is done to make the switch easier to
identify.
Syntax